How to Replace Golf Club Grips

Golf is a precision game, and your gear has a big impact on the quality of your play. One of the least respected features of your golf clubs is the grip. Grips can lose traction and become irritating to you, plus they become slick when wet. When it does, that’s when it’s time to take action. Relax — it’s not as hard as you think! In this article, we will show you How to Replace Golf Club Grips step by step, making the process easy and stress-free.  

Why Replace Golf Club Grips?

Before we jump into how to do it, let’s take some time to understand why you have to do it:

• Wear and Tear: Extended use will smooth and make the handles slick.
• Sweat and Dirt: Grips are constantly left greasy or dirty by hands which adversely affects grip.
• Comfort and Control: Old grips can cause swings to not go as planned.
• Improved Feel: New material for better feel and texture on the course.

The majority of golfers use these grips between 1-1.5 years and in excess of two years.

Also Read: What are the advantages of titanium golf clubs?

Tools You Need

You don’t require any costly equipment to change your golf club grips. Here’s what you’ll need:

• New golf grips
• Double-sided tape
• Solvent (Rubbing alcohol or grip solvent)
• knife or pry off the utility grip
• Voice (optional, but helpful)
• Towel

“You want everything ready so it’s a smooth, quick process.

Also Read: Do different golf clubs make a difference?

Instructions for Changing Golf Club Grips

Step 1: Remove the Old Grip

Clamp the club in a vice if you’re able to. Just be sure to use a towel or rubber sleeve to protect the shaft.

• Using a utility knife or a grip removal tool, cut the old grip off the shaft.
• Remove any remaining tape or residue. Point the shaft and scuff it.
• Pro tip: When using a knife, be sure not to damage the shaft.

Step 2: Apply Grip Tape

• Cut a piece of double-sided grip tape to be a hair shorter than the grip.
• Take the tape and wind it around the section of the shaft where the grip will rest.
• You should press the envelope firmly to get rid of air bubbles.

This tape will secure the new grip.

Step 3: Apply Solvent

• Put a dribble of solvent into the new grip.
• Tilt and spin the grip so the inner side is lined with the solvent.
• Put some solvent on the tape-covered shaft as well.
• The solvent just allows you to slide the grip on easier.

Step 4: Install the New Grip

• Pull the grip onto the shaft while it’s still moist with solvent.
• Shove it all the way down the shaft.
• Adjust the logo and pattern on the handle to your liking.
• Blot any remaining solvents from the surface with a cloth.

Pro Tip: Don’t panic if some sol- vent comes out the bottom—it will evapo- rate.

Step 5: Let It Dry

• Let the grip dry for at least 2 hours prior to playing.
• Make sure the grip feels stable and does not rotate.

Your club is prepared and ready to play with a new and improved grip!

Also Read: When should a new golfer buy his first set of golf clubs?

Extra Tips for Longer-Lasting Grips

• Wash your grips regularly with warm water and mild soap.
• Keep your clubs in a cool, dry area.
• Don’t let them roast in hot cars for hours on end.

Routine maintenance will keep the turns smooth and the clock running for years.

Regripping golf clubs is an easy and low cost way towards a fresh set of clubs. With the proper steps and tools, you can do it at home in less than 30 minutes per club. New grips should help provide you with new control and confidence on the course. So remember these tips next time you are finding it hard to grip a club, and you will find a renewed joy on the golf course!